Gridfinity explained: the 42 mm storage system
What Gridfinity is, how the 42 mm grid and 7 mm height units work, baseplates, bins, magnets and stacking lips — and how to make your own bins.
2 min read
Gridfinity is an open-source modular storage system created by Zack Freedman in 2022. Bins sit on a baseplate with a grid of sockets, so you can rearrange, swap and stack them freely. Because the design is open, thousands of people make compatible bins for every kind of tool and part.
The grid
- 42 × 42 mm per grid unit. A "2 × 1" bin is 84 × 42 mm on the grid (a little smaller in reality, so bins don't jam).
- 7 mm height units. A "3 unit" bin is 21 mm tall, plus the stacking lip.
- Bins are 41.5 mm per unit wide, leaving 0.5 mm of play.
The parts
- Baseplate: a grid of sockets that goes into your drawer or on your workbench.
- Bin: a box with stepped feet underneath that drop into the sockets. Bins can have dividers, scoops, labels or custom cut-outs.
- Stacking lip: a raised rim on top of the bin with the same profile as the sockets, so another bin can stand on top.
- Magnets (optional): 6 × 2 mm round magnets in the feet and baseplate hold the bins in place.
Printing tips
- Bins print without supports — the foot profile is made for it.
- 2–3 walls and 15 % infill are enough; bins are about walls, not infill.
- A baseplate bigger than your bed? Print several plates and lay them next to each other.
Make your own in seconds with the Gridfinity bin generator and the baseplate generator. Need a bin with a custom cut-out for one tool? Open it in the FabCAD editor and cut the shape out with a hole.
Design it in FabCAD
Free, in your browser, made for 3D printing — threads, fits, hinges and print checks built in.
Open the editor